Smart lighting for production sites
Against the background of the energy saving trend, new “smart lighting” systems are in demand. Such a system is ASUNO Spot Light. This unique technology provides economical and automatic lighting control.
Smart lighting for production sites
- Energy savings up to 60% Maintenance cost savings up to 50%
- Equipment condition monitoring
- Rapid response to emergency situations
- Improving the quality of lighting and appearance
Advantages of ASUNO "Spot Light"
The work of "Spot Light" can be evaluated on the example of lighting production sites. During installation and operation of the system, a number of positions are achieved:
- — up to 60% energy savings
- — up to 50% reduction in service costs
- — high speed of response to signals
- — efficient and high-quality space maintenance
The Spot Light system provides smart lighting for production sites. This is a remote control option. The communication scheme is simple: controller + WiFi + computer + program. As a result, the program controls the entire process.
Adjusting the brightness and power consumption is achieved by simply setting the parameters in the program. Also, Spot Light allows you to warn, see and fix the failure. Online monitoring of the network minimizes maintenance costs.
Street lighting system "Spot Light"
Parks
City streets
Motorways
Logistics centers
Main Links Spot Light
The system includes four main links: LED lamps, motion sensors, controllers and a control cabinet. All links are controlled by the program. It reflects their activities and analyzes the state.
In turn, the program allows:
- — take into account the consumption of electricity
- — adjust the parameters (brightness) of lighting
- — remote control of lighting
- — control the operation of motion sensors
Smart lighting of production sites is the use of energy only when needed. Motion sensors allow you to reduce/increase the illumination when needed. The program automatically turns off / on the light according to the given command.
In general, the ASUNO Spot Light system is a convenient, economical and useful tool. This is a profitable investment that pays off with significant cost savings. "Spot Light" is affordable light on safe and comfortable conditions!
Equipment functionality
Spot Light 1.0
The control controller is placed directly on the luminaire, and the controlled driver is in the housing. The controller is connected to the luminaire using the DALI protocol, Zhaga connector. Communication between the outdoor lighting control cabinet (SHUNO) and the controller is organized via a 2.4 GHz radio channel, between the controllers by signal relay. This solution has extensive application experience, due to ease of installation and reliability.
Spot Light 2.0
Placing a controller with a driver in one housing on a lighting pole or inside a hollow pole composition. Communication between the outdoor lighting control cabinet and the controller is organized via WIFI, between the controllers also via relaying. Additionally, the controllers are equipped with clock modules that allow each lamp to work offline, even in the event of a loss of communication with SHUNO. This solution allows you to maintain equipment without aerial platform and connect up to three lamps to one controller at the same time, which allows you to save on the cost of equipment and maintenance in the future.
The Spot Light system includes:
LED lights
Control cabinet
Motion sensors
Control controllers
System management
Brightness
Light brightness domming of both a single luminaire and a line of luminaires
Automation
Commercial accounting of energy consumption.
Transformation
Changing the brightness level of the lamp by the motion sensor
Versatility
Remote control of lighting from any device with Internet access
Regulation
Turn on / off in accordance with the specified parameters (according to the table of sunrises and sunsets)
Request a call
Contacts
Request a call
We will call you back shortly.
System Composition
WIRE REMOTE DIAGNOSTICS MODULE
- current in the wire
- wire temperature
- wire sag angle
- amplitude and frequency of wire vibration
- wire break in span
- GPS positioning and binding of overhead lines to cartographic data
- Phasellus leo dolor tempus non
MODULE FOR REMOTE DIAGNOSIS OF INSULATORS
- leakage current and its change depending on weather and other parameters
- angle of deviation of the garland from the vertical axis
- wire sag angle
- wire break in span
MODULE FOR REMOTE DIAGNOSTICS OF SUPPORTS
- support angle
- amplitude and frequency of vibration of the upper part of the support.
WEATHER STATION
- temperature
- humidity
- wind speed and direction
- amount of precipitation
- solar Activity
- reception of forecast meteorological data over the network
- artificial intelligence processing
SECURITY MODULE
- unauthorized entry into the security zone of overhead lines
- unauthorized climbing on the supports of overhead lines
- prevention of metal theft and destruction of overhead lines
- Phasellus leo dolor tempus non
For more information, you can contact us by phone: +7(4872)55-26-44 e-mail: info@serviceenergy.ru or fill out the feedback form.